Announcement

Collapse
No announcement yet.

New Compliance Plate

Collapse
This is a sticky topic.
X
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • New Compliance Plate

    hey guys
    i am thinking of getting a new comp plate from these guys
    http://www.khneisser.ch/products/60/...alia-vin-plate
    has anyone dealt with these guys before?
    is there someone in aussie that does them?
    will this affect me getting the bike approved for rego?
    i still have the original comp plates if i need them
    thanks
    TK
    --------------------------------
    restoring a Z50J1 '76 model

  • #2
    Can't do it , only people allowed to reissue is Honda them selves. Otherwise it's fraud..

    Comment


    • #3
      Reproduction Compliance Plates on EBay

      Called the Roads and Maritime Services in regard to a compliance plate query and was put through to the Technical Information Hotline (spoke to Colin).

      Told him that I was restoring my bike and that I wanted to replace the damaged compliance plate with a repro plate available on EBay that was just like the original, he said "The issue with fiddling with the plates is that it makes it hard to prove that the bike is now still the same bike, the compliance plate should not be removed".

      Then asked that if the plate was missing could I replace it with a copy, he said "No that would be an act of fraud but if your bikes numbers are already on the RMS system it does not matter if the compliance plate is missing, it's only needed to establish registration".

      I then said that I wanted my bike to look 100% complete with a new plate, I thought it may be ok if I carried the old compliance plate with me when I was riding after fitting the new plate, he said "No".

      Cheers

      Jaimie
      Classic Honda 50's Australia - Visit our online store at - www.classichonda50saustralia.com.au

      PERFORMANCE, REPRODUCTION AND OEM PARTS TO SUIT OLD AND NEW HONDA AND OTHER 4 STROKE MINIBIKES AND MOTORBIKES INCLUDING KAWASAKI, YAMAHA AND SUZUKI.

      Parts to Suit: Honda Z50A, Z50J1, Z50JZ, Z50R, Z50JDM, Z50M, QA50, QR50, MR50, XR50, CRF50, ATC70, CT70, CZ100, MSX125 (Grom), ST70, SL70, XL70, TRX70, XR75, XR80, TRX90, Kawasaki KLX110 and Z125 models to name a few.

      Comment


      • #4
        Have made thread stick
        its engine oil madge ,,,
        Your soaking in it ,,!!

        Comment


        • #5
          so if the rms says to not even touch the plate one should just protect it during sand blasting and cover for repainting, or would it be fune to remove the old rivets and re fix on after paint?

          Comment


          • #6
            Who's to know if the plates been taken off a refitted if you don't tell anyone. You can buy the rivets.

            Comment


            • #7
              Any honda dealer can supply you with new rivets over the counter .
              its engine oil madge ,,,
              Your soaking in it ,,!!

              Comment

              Working...
              X