Announcement

Collapse
No announcement yet.

Tb88 bigbore kit running 22mm mikuni carb

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Tb88 bigbore kit running 22mm mikuni carb

    Any body running a 22mm mikuni carb on there 88cc bigbore? Do they run any good or to big?

  • #2
    I would suggest an 18 or a 20 but it's possible to get a 22 to work.

    I posted dyno results for a little hardtail I put a PD22 on an 88. That carb ended up working far better on a daytona 150

    My thoughts were that it was sucking in too much air so you had to be careful on the throttle or it would bog down at the initial jet change.
    Life is too short for cheap carbs...

    Comment


    • #3
      Yeh I just took it off, did a plug check and seamed really lean so I wad wondering what jetting or if anyone is using one.

      Comment


      • #4
        Go to the forum section called dyno results

        I posted all the info there.
        Life is too short for cheap carbs...

        Comment

        Working...
        X